Cadmium, a soft bluish metal that is bright silver in appearance, provides a superior protective coating that stops corrosion. It is an exceptional metal for corrosion protection because it has great electrodeposition throwing power. Cadmium plates down into the hidden recesses of machined parts and fasteners.
An excellent choice in the metal finishing industry for any part that requires exceptional environmental protection is cadmium. This metal is known to have excellent properties of ductility, solderability, natural lubricity and superior corrosion protection in marine environments as it is also antifungal.
No other metal surpasses the protection of cadmium with the additional properties.
Three J’s Industries uses a cyanide cadmium plating bath. Cadmium can be plated at a commercial thickness of .0001 inch. Additional thickness can be added to increase the corrosion protection of the raw material.
Three J’s Industries electroplates parts with cadmium in conformance with the most current specifications for a number of industry and OEM requirements. Three J's Industries also meets all environmental regulations regarding electroplating.
Superior Corrosion Protection Coating
Exceptional Marine and Environmental Protection
Great throwing power-plates into hidden recesses of parts
Excellent Ductility, Solderability, and Natural Lubricity
Accepts colored dyes
Accepts post-finishes
Electroplated Nuts and Bolts
Salt Spray Testing
Cadmium Plating Conformance to Industry & OEM Requirements
Zinc Electroplating
Zinc Iron Electroplating
Cadmium Electroplating
Bright Dipping
Passivation
Post Finishing Services
Baking
Waxing
Heavy Wax
Water Soluble Wax
Torx & Tension Wax
Wax with a Color Dye
Trivalent Post Finishes
Trivalent Clear
Trivalent Yellow
Trivalent Black
Trivalent Olive Drab
Trivalent Red
Trivalent Blue
Trivalent Metric Blue
Trivalent Green
Trivalent Orange
Trivalent Violet
Trivalent Fuchsine
Hexavalent Post Finishes
Clear Chromate
Yellow Dichromate
Yellow Leach
Yellow Leach After Bake
Silver Black
Red Dye
Blue Dye
Metric Blue
Green Dye
Olive Drab
Orange
Violet
Fuchsine
Sealers
Seal #2
Seal #3
Seal #4
Seal #5
Seal #5 Plus
Enseal #26
Gleitmo 603
Gleitmo 627
Facility Features
Sophisticated and Flexible Production Lines
The modern processes and equipment at Three J's Industries are designed for the following reasons:
To consistently achieve the requirements of demanding specifications.
To provide flexibility in the production schedule in order to meet delivery commitments.
To maintain a clean operation necessary to minimize wastes and emissions.
Any size job from the smallest fastener to the largest stamping can be accommodated. The company has backup items on all equipment to ensure no downtime. A complete machine shop is located on site where equipment can be precisely fabricated and maintained for production.
Modern and Comprehensive Laboratory
With the instrumentation in its modern laboratory, Three J’s Industries has the capability of testing:
The plating thickness of parts by using a magna gauge, eddy current or x-ray machine.
Both plating baths for its proper chemical make-up by doing titrations daily.
The quality of its water with an atomic absorption spectroscopy machine.
In-house salt spray testing is available to ASTM B117
In addition to this laboratory equipment, Three J’s Industries has a Rockwell Hardness Tester and Comparator on site as reference tools for our customers.
Chemical Safety and Environmental Compliance
The processes and equipment at Three J’s Industries, Inc. are designed to ensure compliance with all applicable environmental regulations and permits. Our facility’s waste treatment was designed with piping overhead, rather than underground, so there is no danger of soil and groundwater contamination. Clean process operation minimizes wastes and emissions that could otherwise contaminate the environment.
Printable Page
Email This Page
